Electromed — Header + Mega Menu v2
Browse
All Products 5 categories
Categories
LED Display Boards 8 products
Multi Channel Display Boards 7 products
Jumbo Displays and Digital Indicators 9 products
Jumbo Clocks 10 products
Queue Management Systems 5 products

A surgery timer for an operation theatre

A typical setup for showing elapsed time clearly across the room.

Typical application. This is an example of how these products are commonly set up. It is not a report on a specific customer or a measured result. Your own site will differ, so send us the details and we will specify it for you.

Theatre staff often want to see how long a procedure has been running. A large stopwatch on the wall counts up in hours, minutes and seconds, and a nurse starts and stops it with a push button. A room about 10 metres wide is well served by the smallest size.

A typical set of displays

What you need to showTypical choice
Elapsed time in hours, minutes and secondsStopwatch, HH:MM:SS display (6 digits)
Start, stop and resetPush button, or a potential-free contact from another system
Readable across the roomThe 2 inch digit size is readable up to about 20 metres
A countdown for a timed stepCountdown Timer, set over WiFi from a phone, with a relay output at zero

What to decide

Indoor use

Covered indoor rooms normally use the standard IP54 enclosure.

View

Who operates it

Decide whether staff use a push button or an existing control panel.

Mounting

Tell us the wall and the distance to the furthest viewer.

Planning something like this?

Tell us what you need to show, the signals and the viewing distance. We will propose a setup and quote within 24 hours.

Scroll to Top